Factory-Direct Gate Openers — Ships to North America, Australia & Southeast Asia | Call Now: +86 198 7941 5670
Black Bear Logo
Sliding Gate Operators

28 Rack-and-Pinion Sliding Door Operator

Two models. One platform. Every sliding gate covered. This sliding gate opener runs on 24V DC, moves at up to 0.3 m/s, and ships complete with controller, remotes, and all hardware. Choose 200W for gates up to 1,200 kg or 400W for gates up to 1,800 kg.

1,800 kg
Max gate weight
≤60 dB
Running noise
-35°C to 70°C
Operating temperature
10
Programmable controller settings
Request a Quote
Free Site Survey
Certified Installation
Local Warranty
The Sliding Gate Opener That Handles Up to 1,800 kg.

Overview

Open Bear's sliding gate opener handles gates up to 1,800 kg — 150 Nm of torque on the 400W model, 89 Nm on the 200W. Both run on a 24V DC rack-and-pinion drive, operate from -35°C to 70°C without modification, and ship complete with controller, remotes, and all hardware. Sold factory-direct from the manufacturer — no reseller markup, full English documentation in every box.

Overview
CHOOSE YOUR MODEL

1,200 kg or 1,800 kg. Pick the One That Matches Your Gate.

The 200W model delivers 89 Nm of torque and handles gates up to 1,200 kg — right for most residential driveways. Step up to the 400W and torque rises to 150 Nm, pushing the capacity to 1,800 kg — enough for a full industrial entrance gate. Same controller. Same dimensions. Same rack-and-pinion drive. Only the power and capacity change.

1,200 kg or 1,800 kg. Pick the One That Matches Your Gate.
SMART ACCESS

Five Ways to Open Your Gate. Your Choice.

The controller connects to every major access method — press a button, tap an IC card, walk through a microwave sensor, use the included remote controls, or connect a face recognition terminal. Every method works through the same controller. Run one or several simultaneously to match your property and security setup.

Five Ways to Open Your Gate. Your Choice.
PRECISE CONTROL

10 Settings. Set Once. Works Every Cycle After That.

The controller gives you full control over how your gate behaves — opening speed, closing speed, auto-close delay, deceleration position, obstacle response, and more. Ten parameters, set once during installation. The controller stores every setting across power cycles — no re-entry needed after an outage. A battery backup module keeps the gate running normally if the grid goes down.

10 Settings. Set Once. Works Every Cycle After That.
BUILT FOR ANY CLIMATE

24V DC. Quiet at 60 dB. Works from -35°C to 70°C.

The motor runs on 24V DC — well below the voltage where electric shock becomes a risk, even if someone touches the gate while it moves. Both models run at 60 dB or below — quieter than a normal conversation. The operating range covers -35°C to 70°C, so the same unit works through a Canadian winter and an Australian summer without modification.

24V DC safety voltage — safe to touch during operation

≤60 dB running noise — both models

-35°C to 70°C operating range

24V DC. Quiet at 60 dB. Works from -35°C to 70°C.

Technical Specifications

Rated operating voltage
24–36V DC
Motor Operating Voltage
DC24V
Power
200W
Operating current
6A
Output torque
≥89 Nm
Motor rotation speed
3,000 rpm
Running speed
0.2–0.3 m/s
Max gate weight
≤1,200 kg
Drive method
Rack-and-pinion
Running noise
≤60 dB
Operating temperature
-35°C to 70°C
Operating humidity
≤95% non-condensing
Temperature rise
≤15°C
Controller dimensions
219 × 154 × 52 mm
Motor dimensions
277 × 130 × 193 mm
Rated operating voltage
24–36V DC
Motor Operating Voltage
DC24V
Power
400W
Operating current
12A
Output torque
≥150 Nm
Motor rotation speed
3,000 rpm
Running speed
0.2–0.3 m/s
Max gate weight
≤1,800 kg
Drive method
Rack-and-pinion
Running noise
≤60 dB
Operating temperature
-35°C to 70°C
Operating humidity
≤95% non-condensing
Temperature rise
≤15°C
Controller dimensions
219 × 154 × 52 mm
Motor dimensions
277 × 130 × 193 mm

What's in the Box

Everything You Need. One Box. Ready to Install.
Motor unit
Worm reduction motor — 200W or 400W depending on model
Controller board
10-parameter programmable controller — 219 × 154 × 52 mm
Remote controls
2× RF remotes included
Mounting hardware
All brackets and fixings included
Anchor bolts
Full set included
End stops
Gate travel limiters included
English manual
Installation guide, wiring diagram, parameter table